23/03/2014

Mod request!

Got a mod you want to request? Request it here! Leave a comment with all the information needed to make the mod, and you never know, it may get done!

It is however very unlikely that your mod will get made. I've created this area for me and other mod teams to come to for ideas for mods. To increase your chances of getting a mod made, include pictures and a link to a page with dimensions and specifications.

134 comments:

  1. Unknown17 April 2014 at 11:40

    jcb tm320s and nc 14ton silage trailer or a slurry pumping kit e.g. slurry pump, pipe real and speader

    ReplyDelete
  2. Anonymous27 April 2014 at 12:04

    a John Deere 5055E without cabin with the pipe down the engine and not next to the engine, i also got some pictures from it (we got a John Deere 5055E) so if you need them, ask me.

    ReplyDelete
  3. Anonymous27 April 2014 at 12:04

    Volvo L60G

    ReplyDelete
  4. scott davies27 April 2014 at 12:15

    jcb 435s

    ReplyDelete
  5. aaron27 April 2014 at 12:17

    fusion baler that can wrap if u want it to and also a jcb farmall 414 or somthing simmilar for the pit ;)!!!

    ReplyDelete
  6. Anonymous27 April 2014 at 12:39

    jcb diggers and mchale fusion :) :)

    ReplyDelete
  7. Unknown27 April 2014 at 12:41

    JCB 414s/416s

    ReplyDelete
  8. Unknown27 April 2014 at 12:47

    John Deere 2140 2WD and sg2 cab

    ReplyDelete
  9. Dan27 April 2014 at 12:58

    Teagle Titan 10. With lights and everything. Website=== http://www.teagle.co.uk/en-gb/products/rear-discharge-muck-spreaders/titan-10-12.php. Please make this as there arnt any decent spreaders on FS13

    ReplyDelete
  10. Dan27 April 2014 at 13:03

    A teagle 7100 bale chopper. Website === http://www.teagle.co.uk/en-gb/products/box-tomahawk/tomahawk-7100.php. Please do this as there arnt any bale choppers on FS 13

    ReplyDelete
  11. Unknown27 April 2014 at 13:20

    Id like to see a decent fendt 828. The others have been done to perfection but the 828 seems to have been neglected

    ReplyDelete
  12. Unknown27 April 2014 at 15:06

    jcb 435s with flotation tyres and high tip bucket

    ReplyDelete
  13. James27 April 2014 at 15:40

    Massey Ferguson 4255 with all opening windows etc, need a good small massey as aint many been made and theyre a great little tractor ;)

    ReplyDelete
  14. Unknown27 April 2014 at 16:45

    Massey Ferguson 7619 :D

    ReplyDelete
  15. Unknown27 April 2014 at 18:43

    UN masssey ferguson 5400 svp il n,en existe aucun sur ls 2013et sa manque vraiement

    ReplyDelete
  16. Unknown27 April 2014 at 20:22

    Stewart Trailer tipper

    ReplyDelete
  17. Unknown28 April 2014 at 01:49

    massey ferguson 390

    ReplyDelete
  18. Anonymous29 April 2014 at 05:55

    loader Volvo l60g or l90g

    ReplyDelete
  19. Anonymous29 April 2014 at 07:39

    Class axion 850

    ReplyDelete
  20. Unknown29 April 2014 at 15:02

    How a about a Pomi Bale Accumulator?
    http://www.pomi.dk/files/manager/brochurer-uk/brochure%20ballevogn%20gb.pdf
    http://www.pomi.dk/uk/bale-accumulator.html

    ReplyDelete
  21. Anonymous2 May 2014 at 22:08

    You could make a ford 7840 SLE that you can open the bonnet and stuff in it that you can change the gear and maybe have a loader bracket for a loader

    ReplyDelete
  22. tt6 May 2014 at 21:05

    i think u should make a 414s

    ReplyDelete
  23. Anonymous7 May 2014 at 12:34

    A New Holland T5!

    ReplyDelete
  24. Anonymous9 May 2014 at 20:38

    Id love to see a welger rp 235 round baler brought into the game

    ReplyDelete
  25. Anonymous10 May 2014 at 12:55

    A Mengele rotobull 8000 ore in the colors of a Lely Tigo. That would be great!

    ReplyDelete
  26. Anonymous10 May 2014 at 21:38

    krone Big m please!

    ReplyDelete
  27. Anonymous14 May 2014 at 20:13

    beef farm map

    ReplyDelete
  28. mikiebaii15 May 2014 at 22:27

    Armer salmon 2 row beet harvester plz

    ReplyDelete
  29. Anonymous18 May 2014 at 10:56

    Can you make a fendt trisix. A realistic version of it.

    ReplyDelete
  30. Anonymous20 May 2014 at 21:53

    A 2004 model New holland ts 100 A as shown on this link:http://www.farminguk.com/marketdetail/New-Holland-TS100A_2972.html

    ReplyDelete
  31. Anonymous21 May 2014 at 13:02

    fendt724

    ReplyDelete
  32. Unknown21 May 2014 at 18:25

    fiat 80-90 2wd. same size as the ihc 844S or the steyr pack from MB 3D modeling. same sound quality and specs ...

    ReplyDelete
  33. Anonymous22 May 2014 at 18:19

    John deere 6930 with all opening windows

    ReplyDelete
  34. Unknown22 May 2014 at 23:33

    Any Oliver Tractor

    ReplyDelete
  35. Anonymous23 May 2014 at 21:06

    a proper jd 6930 with a good steering lock and nice detail

    ReplyDelete
  36. Anonymous23 May 2014 at 22:07

    Jeez, getting some serious amount of requests with no detail, So Ill give it a go!
    Massey 390T
    1989-1997
    Wheelbase: 84.1 inches [213 cm]
    Weight: 6,400 lbs [2903 kg]
    Front tire: 7.50-16
    Rear tire: 18.4-30
    Engine: 95 hp
    PTO: 80 hp
    4 Cylinder 3.9 Liter engine
    Made in Coventry, This makes no difference, but I mentioned it anyway :p
    [img]http://www.agriavis.com/medias/images/avis/originales/avis_2987-1.jpg[/img]

    ReplyDelete
  37. Unknown28 May 2014 at 22:57

    bailey silage trailers
    aw trailes
    jcb 320s and 416s
    sumo trio mounted and other sumo kit

    ReplyDelete
  38. Unknown30 May 2014 at 04:39

    A Terra-Gator 1603T sprayer and or Spreader

    ReplyDelete
  39. Anonymous4 June 2014 at 02:29

    an ag bag silage bagger

    ReplyDelete
  40. Anonymous4 June 2014 at 19:14

    a massey ferguson 185

    ReplyDelete
  41. Unknown4 June 2014 at 23:56

    john deere 3040 sg2 cab

    ReplyDelete
  42. Unknown8 June 2014 at 15:07

    Massey 595

    ReplyDelete
  43. Shane wilson8 June 2014 at 23:35

    A slurry can pipe line system would be good for farming simulator

    ReplyDelete
  44. Anonymous9 June 2014 at 18:58

    Could you please make a Mchale Fusion 3plus and a JCB316s please

    ReplyDelete
  45. Anonymous10 June 2014 at 22:04

    Can u make a 15' and 20' flex-wing mower please? i'll really appreciate it if you would release this mod very soon, thanks!!!

    ReplyDelete
  46. Anonymous11 June 2014 at 13:09

    hello samn could u make a loading shovel or a mchale wrapper or a fleming or mchale bale handler

    thanks

    ReplyDelete
  47. Unknown14 June 2014 at 09:58

    Valtra 6850 whit frontloder :)

    ReplyDelete
  48. Anonymous18 June 2014 at 18:13

    please new holland big baler 890

    ReplyDelete
  49. Anonymous21 June 2014 at 14:44

    Can please make a zetor forterra hsx 140 with opening doors and windows and a frontloader

    ReplyDelete
  50. Anonymous6 July 2014 at 11:49

    what about a Krone Big M MkII ? That would go down well with the mchale!

    ReplyDelete
  51. Unknown8 July 2014 at 22:00

    Could ya do the redrock silage trailer
    www.redrockmachinery.com/silage-trailer.aspx

    ReplyDelete
  52. Unknown9 July 2014 at 18:27

    Could you make a John Deere 1075 Combine for FS 2015??

    ReplyDelete
  53. Anonymous10 July 2014 at 19:20

    a wrapper, a decent krone baler with the ability to change bale size and a zetor 11741 tractor with front loader. and also a zetor 11441

    ReplyDelete
  54. Anonymous13 July 2014 at 15:33

    a decent wrapper to suit McHale f550 bales

    ReplyDelete
  55. Anonymous18 July 2014 at 17:02

    a krone easy cut conditioner mower

    ReplyDelete
  56. Anonymous18 July 2014 at 17:03

    a frontloader for a john deere 6210r and brackets

    ReplyDelete
  57. Unknown22 July 2014 at 19:17

    Some remakes of the grassmen machinery would be nice.If your wondering just look them up on youtube but i say you know who they are

    ReplyDelete
  58. Anonymous27 July 2014 at 13:10

    john deere 6m series

    ReplyDelete
  59. Anonymous1 August 2014 at 12:24

    could you make a krone big m 400 aload of contractors have them and also an o&k series (l25,l6,l15) or a jcb 414s farmaster

    ReplyDelete
  60. Unknown2 August 2014 at 19:31

    New Holland T5.105 New Holland T7.170

    ReplyDelete
  61. Unknown13 August 2014 at 15:45

    John Deere 744 Premium with wrapper!

    ReplyDelete
  62. Nick791523 August 2014 at 23:03

    A Weidemann Hoftrac 1115.

    Just like the Weidemann Hoftrac 916 from fs2011.
    (If you can convert that one to fs2013 also, it would be awesome!)

    ReplyDelete
  63. Anonymous26 August 2014 at 20:21

    case 1056 XL and reco mengele 30!!

    ReplyDelete
  64. Unknown28 August 2014 at 16:10

    McHale fusion or mf 5455 frontloder and square bonet 2006 model

    ReplyDelete
  65. Unknown22 September 2014 at 13:45

    case ih farmall u pro 115. info @ http://www.caseih.com/en_gb/Products/Tractors/Pages/FarmallUPRO.aspx

    ReplyDelete
  66. Unknown24 September 2014 at 01:05

    john deere pickup header

    ReplyDelete
  67. Anonymous13 October 2014 at 19:30

    I would like a john deere 6430 or something similar. It is a good tractor and im sure you could make a good job of creating the machine.

    ReplyDelete
  68. Anonymous14 October 2014 at 18:08

    hi SamN modding, can you make a John Deere 30sieres tractor with about 120hp please. with the working clutch and extras.
    You can find picture and dimensions at www.tractordatajohndeere6430.com. Cheers Martin

    ReplyDelete
  69. Anonymous31 October 2014 at 07:04

    Hi I would really appreciate to see a front loader mod set where you can buy the certain size loader for your tractors horsepower.
    Go to Quickie loaders for more detail on the loaders.

    ReplyDelete
  70. Anonymous5 November 2014 at 16:35

    Ford 7710 and Ford 8310 with fors 2 cabine

    ReplyDelete
  71. Unknown9 November 2014 at 02:28

    Hi friends can you make a mod of the Krone Combi Pack ?? with the commands in spanish please, i'm from chile , congrats for the job u are amazing

    ReplyDelete
  72. Anonymous12 November 2014 at 17:08

    Hi , its possible to john deere F serie , like john deere 1950 F (st) or 2450F (St) or 1850f?. Thanks.

    Regards

    ReplyDelete
  73. sam17 November 2014 at 16:42

    1455!!!!!

    ReplyDelete
  74. Anonymous23 November 2014 at 20:21

    Old model JCB 416 or Volvo L70C

    ReplyDelete
  75. Anonymous23 November 2014 at 20:40

    Ford 7610 4WD. http://www.cheffins.co.uk/assets/catalogues/lots/207/1034.jpg

    ReplyDelete
  76. Anonymous23 November 2014 at 20:44

    claas 980 for fs 15

    ReplyDelete
  77. Anonymous24 November 2014 at 19:25

    ford 7810 or any old ford not many going about or matbro tr250
    for fs15

    ReplyDelete
  78. Unknown1 December 2014 at 21:21

    komastu pc600lc

    https://3dwarehouse.sketchup.com/model.html?id=d044e6326247510980232822dfb905ee

    ReplyDelete
  79. Anonymous8 December 2014 at 10:12

    Hi I was wondering if anyone could make this, for all us aussies:http://www.holden.com.au/cars/ute
    if you need any pictures i can get some as my brother owns one

    ReplyDelete
  80. Anonymous18 December 2014 at 19:47

    Mchale fusion
    And a skidder tractor (cat) for logging.

    Converting the Chevrolet Silverado from LS13 to LS15.

    ReplyDelete
  81. Anonymous22 December 2014 at 12:31

    john deere 6125r or a john deere 6125m

    ReplyDelete
  82. Unknown25 December 2014 at 22:15

    A chessboard ruler for dumping logs to be cut with a chainsaw. 1 square meter black and white chess board would be nice. so we can cut logs precise without needing a scorpion king

    ReplyDelete
  83. Unknown25 December 2014 at 22:16

    This comment has been removed by a blog administrator.

    ReplyDelete
  84. Unknown21 February 2015 at 16:15

    Claas axos 340 cx, please!!

    ReplyDelete
  85. Unknown21 February 2015 at 16:53

    Case 970 with a cab and without a cab.. There was a mod for fs2013 but nothing for fs2015

    ReplyDelete
  86. Unknown21 February 2015 at 17:00

    can you make this chipper as a mod to farming simulator 2015

    kesla c645c

    total weight 19 500 kg

    total lenght 7 750 mm

    weidth 2 650 mm

    height 4 000 mm

    in take width 600 mm

    in take height 450 mm

    drum diameter 570 mm

    tire size 550/45x22,5

    Chassis (axle) 2

    Loader options a kesla cran 600/700

    horse power. 100-220 kW

    Number of knives pcs. 6

    it can make 160 m3 in the hour

    Container volume 16 m3

    It is made in Finland

    ReplyDelete
  87. Anonymous21 February 2015 at 17:48

    A miedema mt 15 tipper would be awesome, good luck with choosing a nice mod.

    ~Cheers, JD7530-Chris

    ReplyDelete
  88. Valmet45521 February 2015 at 20:28

    A New Holland T5060 DLX with trima +2.0 loader or a Valmet 455

    ReplyDelete
  89. Anonymous21 February 2015 at 21:41

    a new holland cx 8050 or 8080 combine with camera's on the back and on the pipe

    ReplyDelete
  90. Anonymous21 February 2015 at 23:23

    Steyr ctv 170 and a silvatec 878ch anda
    and a John deere 8360r and a krampe halfpipe

    ReplyDelete
  91. Unknown22 February 2015 at 08:17

    John deere 9630T not seen any good big John deeres yet

    ReplyDelete
  92. Unknown22 February 2015 at 10:55

    valtra 8950 RED

    ReplyDelete
  93. Unknown1 March 2015 at 18:22

    Ford 8210 and 7810

    ReplyDelete
  94. Unknown2 March 2015 at 06:25

    CAT 996K Wheel Loader with AMI Log&Lumber Attachment
    MAN TGS 40.400 6x4 Day Cab Tractor Head with Doll Long timber Trailer.
    and Volvo FC2421C Forestry Carrier With Ponsse Head

    ReplyDelete
  95. Unknown8 March 2015 at 11:51

    Cat Challenger 865B

    ReplyDelete
  96. Anonymous23 March 2015 at 21:23

    john deere 8000 series chopper

    ReplyDelete
  97. Unknown29 March 2015 at 17:05

    http://twentywheels.com/imgs/a/a/r/n/o/2008_ford_f550_1_lgw.jpg

    Can you make this please bigger enough to fit a tractor on the back and either ramps onto it or the body comes down also on the back have multiple towing hooks for any trailers and there for lights can have lightbar and strobe flasher front and back please ?
    Also can you make the cab all black and have the white strobes in the headlights and orange strobes in the grill then on the back orange strobes at least 4

    ReplyDelete
  98. Unknown1 April 2015 at 19:55

    AP GV 25 and 35 with hose-boom and injector

    ReplyDelete
  99. Anonymous2 April 2015 at 13:34

    Holmer terra dos 6 row beet harvester

    ReplyDelete
  100. Anonymous9 April 2015 at 00:31

    Make some American International Harvesters for fs13.

    ReplyDelete
  101. Anonymous29 April 2015 at 18:32

    massey ferguson 5455

    ReplyDelete
  102. Marius2 May 2015 at 15:11

    Hey Sam! Can you please make a Massey Ferguson 5600 to the Farming Simulator 2015? With Front Loader console? Please!?

    ReplyDelete
  103. Knut Arild4 May 2015 at 12:58

    Hello, can you make a mf 5600 or a mf 5455?

    ReplyDelete
  104. Anonymous14 June 2015 at 15:08

    New Holland ford 8360

    ReplyDelete
  105. Anonymous15 June 2015 at 18:49

    case international and a a silage trailer donelley or kane preferebly

    ReplyDelete
  106. Anonymous17 June 2015 at 21:16

    smyths trailers pack

    http://www.smythtrailers.com/

    ReplyDelete
  107. Unknown25 June 2015 at 17:24

    david brown 1390 2wd flotation tires on front international 896 xl (red white ) ew holland conventional baler lely tornado

    ReplyDelete
  108. Anonymous2 July 2015 at 03:28

    Claas tucano of 2013 Montana

    ReplyDelete
  109. Anonymous5 July 2015 at 12:06

    Kverneland un7000 and JF FC 850

    ReplyDelete
  110. Anonymous5 July 2015 at 12:10

    Moi doff x 15 jet

    ReplyDelete
  111. Anonymous8 July 2015 at 21:20

    John deere 7280r with a front loader would be nice maybe a quicke loader

    ReplyDelete
  112. Unknown19 July 2015 at 00:39

    DB120 John Deere planter and a John Deere 6115D plzzz

    ReplyDelete
  113. Unknown19 July 2015 at 00:40

    DB120 John Deere planter and a John Deere 6115D plzz

    ReplyDelete
  114. Fras0510 August 2015 at 18:26

    Massey Ferguson 6465 2011 with no front linkage and a Vicon RV4216 round baler please

    ReplyDelete
  115. Anonymous25 August 2015 at 16:41

    massey ferguson 690 with quicke fl and weldger ap 52 small square baler

    ReplyDelete
  116. Anonymous31 August 2015 at 22:35

    A grimme GT 170 would be great

    ReplyDelete
  117. Anonymous12 September 2015 at 08:21

    Faitagri 110-90 chrome straight pipe turbo 2 single beacons and 1 double beacon and two cb aerials

    ReplyDelete
  118. Unknown21 September 2015 at 18:46

    A tube line wrapper for round bales

    ReplyDelete
  119. Andrew B3 October 2015 at 20:44

    How about a re-visit on your Ford 7810? You could do 2wd and 4wd versions, as well as the silver special. It was a tractor I always used on the old FS, and I feel that Ford of that era have been missed by most mod makers. Things like this, the 8630, the TW's, and County 1474, etc, etc, are seriously lacking in FS.

    Many Thanks.

    ReplyDelete
  120. greeone1122 December 2015 at 00:39

    what about a john deere flailed forage harvester or a vermeer baler

    ReplyDelete
  121. Unknown23 December 2015 at 23:58

    a Massey ferguson 4200 series 5400\5600 series 6200\6400\6600 series or 7400 series

    ReplyDelete
  122. Unknown24 December 2015 at 22:41

    John Deere 8820 Titan II With 9m Straight Cut Header

    ReplyDelete
  123. Unknown26 December 2015 at 22:18

    Richard Western SF14 conversion from fs13

    ReplyDelete
  124. Chris1 January 2016 at 17:56

    Ford 7610 4WD & 2WD

    Tires
    Ag front: 7.50-16 (2WD)
    11.2-24 (4WD)
    Ag rear: 16.9-30
    Ag front: 7.50-18 (2WD)
    10.00-16 (2WD)
    12.4-24 (4WD)
    13.6-24 (4WD)
    14.9-24 (4WD)
    Ag rear: 18.4-30
    16.9-34
    18.4-34
    16.9-38

    Dimensions
    Weight (shipping): 5,935 lbs [2692 kg]
    Weight (ballasted): 11,000 lbs [4989 kg]
    Wheelbase: 87.5 inches [222 cm]
    Length: 145 inches [368 cm]
    Width: 68.6 inches [174 cm]
    Height (ROPS): 95.9 inches [243 cm]
    Height (cab): 106.6 inches [270 cm]
    Ground clearance: 18.4 inches [46 cm]
    Front tread: 52 to 80.5 inches
    [132 to 204 cm]
    Rear tread: 60 to 80 inches (manual)
    [152 to 203 cm] (manual)
    56 to 90 inches (power)
    [142 to 228 cm] (power)
    2WD turn radius: 11.5 feet [3.5 m]

    ReplyDelete
  125. JMM11 January 2016 at 18:30

    I would love to see a 6215R or even a full 6R series…
    A 6M would be sweet as well, for Example a Small 6M for the Cow farm…

    ReplyDelete
  126. Unknown26 January 2016 at 17:47

    JCB 520-50 FARM SPECIAL PLEASE

    ReplyDelete
  127. Mike17 February 2016 at 13:47

    There is a lack of 4m mounted equipment. It would be nice to see a 4m Lemken Solitair combination drill & 4m Lemken front press as seen in this video https://www.youtube.com/watch?v=XV6tP0fQjUc

    ReplyDelete
  128. Unknown16 April 2016 at 11:43

    newholland t5060

    ReplyDelete
  129. Unknown1 September 2016 at 03:32

    I think your next edit should be Kane
    trailers I think the are just amazing and probably suit most tractors in game

    ReplyDelete
  130. Unknown21 September 2016 at 18:24

    Volvo BM 500

    ReplyDelete

Got a comment? Add it here!

Subscribe to: Post Comments (Atom)